MacDon HC10, Operation And Parts Manual

Page: 38 / 156

UNLOADING AND ASSEMBLY
9. Position the windrower arms in the lift arm pockets and
insert the L-pins (A) for safety.
Figure 3.30: Windrower Arms
10. Remove the stand (A) and store with hairpin (B)
in toolbox.
11. Lift the conditioner and position into the header
opening from the rear.
Figure 3.31: Conditioner Stand
12. Carefully lower the windrower lift legs until lugs (A) on
conditioner are seated in the U-shaped brackets (B)
on header.
13. Ensure the conditioner is seated properly in the
brackets before you disconnect from windrower.
Figure 3.32: Conditioner Lug
214033
28
Revision A