MacDon HC10, Operation And Parts Manual

Page: 115 / 156

REPAIR PARTS
Ref
Part
Number Description Qty
Serial
Number
1 159452 BOLT WELDT – EYE 1
2 130765 BOLT WELDT – EYE 2
3 130757 SUPPORT – HYD MOTOR 1
4 133965 SUPPORT – CASSAPA MOTOR 1
159648 MOTOR – HYD FLOW DIVIDER 9 1 5
159631 SEAL KIT (FOR MOTOR)
6 159645 MOTOR – HYD, GEAR (CAST IRON BODY) 10
159649 MOTOR – HYD, GEAR (ALUMINUM BODY) 11
7 REF NUT – HEX LOCK DT 5/8-18 UNF ZP 12 1
7A REF WASHER – SAE FLAT 5/8 I.D. X 1-15/32 IN. O.D. ZP 12 1
8 159535 KEY – WOODRUFF (1/4 X 3/4 NOM.) 1
9 159632 VALVE – RELIEF 1
9A 159633 NUT – 8MM, M8 SPECIAL 1
10 40241 FITTING – ADAPTER HYD C/W O-RING 1
11 30970 FITTING – ELBOW 90° HYD 1
135314 COUPLER – MALE HYD 3/4 IN. FLAT FACE 1 12
135479 SEAL KIT – 3/4 MALE COUPLER
13 135483 FITTING – ADAPTER HYD 1
14 159029 HOSE 1
135565 COUPLER – FEMALE HYD 3/4 IN. FLAT FACE 1 15
111977 SEAL KIT – 3/4 FEMALE COUPLER
16 21030 FITTING – CONNECTOR HYD, SAE 8 13 1
17 159646 HOSE 13 1
135237 COUPLER – MALE HYD 3/8 IN. FLAT FACE BULKHEAD 1 18
111978 SEAL KIT – 3/8 MALE COUPLER
19 21881 FITTING – ADAPTER HYD 1
20 159028 HOSE 1
135213 COUPLER – FEMALE HYD 3/8 FLAT FACE BULKHEAD 1 21
135481
SEAL KIT – 3/8 FEMALE COUPLER
9. Includes motor (MD #159645), key (MD #159535), valve (MD #159632), and special nut (MD #159633).
10. Preferred motor.
11. Use only if motor (MD #159645) is unavailable.
12. Nut and washer supplied on end shaft of motor (MD #159648) used only to protect threads during shipping. For
service parts, order nut (MD #18714) and washer (MD #1624). For installation position, refer to Section 6.6 Belt
Drive and Shield, page 108 .
13. Order fitting (MD #21030) and hose (MD #159646) together to ensure thread match.
214033
105
Revision A