MacDon HC10, Operation And Parts Manual

Page: 21 / 156

PRODUCT OVERVIEW
2.2 Specifications
NOTE:
Specifications and design are subject to change without notice or obligation to revise previously sold units.
Item Specification
Frame and Structure
Total Weight (estimated) 770 kg (1700 lb)
Carrier (North America only) MacDon M150, M155, M155 E4 , and M200 Self-Propelled Windrowers
Carrier (Export only) MacDon M100, M105, M150, M155, and M200 Self-Propelled Windrowers
Header MacDon Double-Knife Drive D60 and D65 Draper Headers
Manual Storage In Windrower Cab
Drives
Main Conditioner 51.83 cc (3.16 cu in.) Hydraulic Motor with 21.14 cc (1.29 cu in.) Flow
Divider
Feed Deck 65 cc (4.0 cu in.) Hydraulic Motor with 921 psi Relief
Connections Flat Faced Quick Attach Couplers – Connect Under Pressure
Conditioner 17.0–20.7 MPa (2500–3000 psi) Normal
Operating
Pressure
Feed Deck 4.1 MPa (600 psi)
Conditioner
Drive Hydraulic Motor To Belt Driven Roll To Open Timing Gear System
Header Size 15 ft. 20 ft. and 25 ft. 30 ft. 1 35 ft. 1
Roll Speed
772–977 rpm 720–874 rpm 695–927 rpm 695–868 rpm
Feed Draper Speed 437–553 fpm 407–495 fpm 393–525 fpm 393–491 fpm
Roll Type
Intermeshing Steel Bars
Roll Diameter
233 mm (9.17 in.) / 168.4 mm (6.63 in.) OD Tube
Roll Length 1830 mm (72 in.)
Swath Width 915–2540 mm (36–102 in.)
Forming Shields Header Mounted Tractor Supported Adjustable Forming Shield System
NOTE:
To avoid excessive vibration and poor performance, the HC10 Hay Conditioner should NOT be attached to
single-knife drive headers. The HC10 Hay Conditioner is NOT intended for use with the M205 Self-Propelled
Windrower, and is for use with the M100 or M105 Self-Propelled Windrower ONLY in Export markets.
1. To avoid poor performance, the HC10 Hay Conditioner should NOT be attached to 30 ft. or 35 ft. draper headers
in heavy crop conditions.
214033
11
Revision A