MacDon HC10, Operation And Parts Manual

Page: 100 / 156

MAINTENANCE
5.8 Maintenance Schedule
The following maintenance schedule is a listing of periodic maintenance procedures, organized by service intervals.
Regular maintenance is the best insurance against early wear and untimely breakdowns. Following this schedule
will increase machine life. For detailed instructions, refer to the specific headings in this manual. Use the lubricant
specified in
5.4.1 Lubricants, page 80 .
Service Intervals: The recommended service intervals are in hours of operation. Where a service interval is given
in more than one time frame, e.g., "100 hours or Annually", service the machine at whichever interval is reached first.
IMPORTANT:
Recommended intervals are for average conditions. Service the machine more often if operated under adverse
conditions (severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given under 5.1 Preparation for Servicing, page 77 and 5.2 Recommended
Safety Procedures, page 78 .
Table 5.1 Service Intervals
Interval Service
First use Refer to 4.6 Break-in Period, page 67 .
10 hours or daily Check hydraulic hoses and lines.
50 hours Grease roll shaft bearings.
Grease feed deck drive and idler roller bearings.
100 hours or annually
4
Check roll drive belt tension.
End of season Refer to 4.10 Storing the Hay Conditioner, page 76 .
4. It is recommended that annual maintenance be done prior to the start of the operating season.
214033
90
Revision A