MacDon HC10, Operation And Parts Manual

Page: 35 / 156

UNLOADING AND ASSEMBLY
9. Connect the five hydraulic hoses between the
conditioner and the header as follows:
• Small male quick-disconnect from motor to
header (A)
• Large female quick-disconnect from motor to
header (B)
• Small female quick-disconnect from deck to
header (C)
• Small female quick-disconnect from motor to
deck (D)
• Large female quick-disconnect from header to
motor (E)
Figure 3.22: Hydraulic Hoses
A - Case Drain B - Conditioner Motor Pressure
C - Deck Motor Return D - Deck Motor Pressure
E - Conditioner Motor Return
3.6.2 Installing Conditioner: Windrower Method
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine
and remove key before leaving the operator’s seat, and always engage safety props before going under
the machine for any reason.
To install the conditioner using the windrower method, follow these steps:
1. Lower header stand to mid-position (A).
Figure 3.23: Header Stand
214033
25
Revision A