MacDon HC10, Operation And Parts Manual

Page: 25 / 156

3 Unloading and Assembly
To unload and assemble an HC10 Hay Conditioner, follow each of the procedures in this chapter in order.
3.1 Unloading the Hay Conditioner
CAUTION
To avoid injury to bystanders from being struck
by machinery, do NOT allow people to stand in
unloading area.
CAUTION
Equipment used for unloading must meet or exceed
the requirements specified below. Using inadequate
equipment may result in vehicle tipping or machine
damage.
Table 3.1 Lifting Vehicle Requirements
Minimum Lifting
Capacity
2
908 kg (2000 lb.)
Minimum Fork Length 1524 mm (60 in.)
Figure 3.1: Hay Conditioner Bundle #B4798
IMPORTANT:
Forklifts are normally rated for a load located 610 mm
(24 in.) ahead of back end of the forks. To obtain the
forklift capacity at 1220 mm (48 in.), check with your
forklift distributor.
WARNING
Be sure forks are secure before moving away from
load. Stand clear when lifting.
Figure 3.2: Feed Deck Bundle #B4799
2. At 1220 mm (48 in.) from back end of forks.
214033
15
Revision A