MacDon HC10, Operation And Parts Manual

Page: 29 / 156

UNLOADING AND ASSEMBLY
3.4 Installing Deck Brackets
To install the deck brackets onto the header, follow
these steps:
1. Install the two lower brackets (A) onto the inside of both
center header legs with two bolts and nuts (B) in each
bracket.
Figure 3.8: Lower Deck Brackets
2. Install right-hand upper bracket (A) and spacer (B) on
the right-hand center leg as shown in illustration at
right, and install nut (C).
NOTE:
For headers with a sheet metal hose cover,
install bolts from the outboard side.
3. Install the other bolt through the bracket and spacer
and secure with a nut (D).
4. Tighten both bolts.
Figure 3.9: 15-ft Header Shown
5. Install the left-hand upper bracket (A) and spacer (B)
onto the inboard side of left-hand center leg as shown
in illustration at right.
Figure 3.10: Upper Bracket – LH
214033
19
Revision A