Sensopress_LCD_Rev_00_Eng.doc Eng
6
3
INSTALLATION
3.1
Electrical Connection
Below the diagrams of the electric connection for the two versions, the one with 1 output and other
with 4 outputs.
•
Avoid places where it can be possible the formation of condensation.
•
Avoid places where the temperature can decrease under (0°C).
The device is provided with a terminal to which is possible to connect the
Sensopress LCD supply
wires and also the connecting sensor’s wires and those of the relay’s output.
ATTENTION:
All the inner parts of the device are on electricity grid. In case of a contact can bring to death.
All installation and maintenance work must be performed by qualified personnel with proper
tools!
The staff must use appropriate safety devices. In case of failure, disconnect or turn off the power
supply.
Safety devices :
−
Ground protection
−
Use an automatic residual-current device
