Sensopress_LCD_Rev_00_Eng.doc Eng
11
Figure 5
The auto mode is the default one, and if the device is in a different mode, after some minutes of
inactivity it goes on the
AUTO
mode.
After the choise of the wanted mode with the
Menu
button, push button
Yes/+
to enter it.
4.3
Setting menu
By pushing the Menu button it is possible to choose between the different modes of visualising and to
set-up the device.
in particular there are the following modes:
Mode
Accomplished Operation
AUTO
Indicates :
•
The water’s level in the tank
•
The chosen channel
•
The low and the high threshold set-up for the chosen channel
•
The relay’s state of the chosen channel
CHANNEL
Only with the multi-channel version
•
Channel selection both for visualization in
AUTO
and for the set-up of the
intervention’s threshold in
LOW
and
HIGH
.
•
Enabling and disabling of the channels
LOW
Set-up of the low threshold for the chosen channel
HIGH
Set-up of the high threshold for the chosen channel
MANUAL
Manual set-up of the outputs
DISPLAY
Display’s backlight adjustment
PROTECT
Insertion of the device’s protection
CALIB
Fine-tune the water’s level scale
Current mode
Changing mode
request