MT-700
19
Some channels exhibit more background noise than others, so it may be necessary to
readjust the squelch setting when changing channels or when scanning.
Channel Selection
When the transceiver is turned On, the Primary Calling Channel (channel 16) is
selected.
There are three ways to change channels:
•
Rotate the
(
SELECT/ENT
) knob, press and hold the
or
keys,
or directly enter the channel number using the numeric keys on the microphone.
The
and
keys will always change channels except when being
used to enter or edit a directory page.
Channel Banks
Your
MT-700
is designed for use with the International VHF marine channel
frequencies plus authorized local channel frequencies. Only authorized dealers can
program other approved country channels, where specifically allowed by government
regulations, by using the 8 pin com connector.
Keypad, Transceiver
A tone is emitted each time a key is pressed. A three beep error tone is emitted when
a key is not allowed. Some functions require a key to be pressed and held. After the
hold period times out, a second tone is emitted as the function is entered. The basic
purpose for each key follows. Detailed usage of keys is described in operating
procedures for the transceivers various functions.
Initiates DSC operation screens by pressing. Also opens menu to select
optional settings to personalize your transceiver’s operation by pressing and
hold.
Used to complete editing or selection of options from menu.
Used to toggle transmitter power between 25 watts and 1 watt output.
Certain channels are restricted to 1 watt maximum power and will cause the
error beep if the
HI/LO
key is pressed.
Summary of Contents for MT-700
Page 1: ...OWNER S HANDBOOK MT 700 MENU...
Page 81: ...80 MT 700...