MT-700
29
•
Press and hold the
key. The
DIRECTORY
topic appears in the display.
•
Push the
SELECT/ENT
knob. If the directory is empty, the screen appears blank
except for the channel number. If previous entries appear, move the cursor to
an empty line. If no empty line is found, the directory is full and a previous
entry must be overwritten.
•
Push the
SELECT/ENT
knob. The
DIRECTORY NAME/ID
screen appears
with a blinking cursor next to the name line.
INT
DIRECTORY
NAME/ID
>
Name and ID Screen
•
Push the
SELECT/ENT
knob or
key to move the cursor to the first character
of the name line.
SPECIAL NOTE
Characters are entered in the name and ID fields using either the
SELECT/ENT
knob or
the microphone keys.
All letters in the alphabet, a space, and the numbers 0~9, plus punctuation marks and
some symbols may be used. The space character follows Z in the alphabet when
using the
SELECT/ENT
knob. Only numbers are allowed in the ID field.
The following table shows the characters that may be entered in the name field using
the microphone keys.
Several additional special characters are available when entering the name using the
SELECT/ENT
knob.
Summary of Contents for MT-700
Page 1: ...OWNER S HANDBOOK MT 700 MENU...
Page 81: ...80 MT 700...
