30
MT-700
•
Use the
SELECT/ENT
knob or microphone keys to select the desired letter,
number or symbol for the first character.
•
If using the
SELECT/ENT
knob, push the
SELECT/ENT
knob or
key after
each character is selected to enter the character and advance the cursor to the next
character position.
•
If using the microphone keys, press the appropriate key repeatedly until the
desired character is displayed at the cursor position. Then press the appropriate
key for the next character. The cursor automatically moves to the new position.
When entering the same character in two or more successive character positions,
use the
SELECT/ENT
knob or
keys to advance the cursor.
•
Use the
key if necessary to backspace the cursor.
•
Up to ten characters are allowed in the name, but only one is required. Enter
enough characters to positively identify the entry.
•
After the last character in the name is selected and entered, push the
SELECT/ENT
knob or
key again. The cursor moves to the MMSID line.
•
Push the
SELECT/ENT
knob or
key to move the cursor to the first digit
position in the MMSID line.
•
Enter the first number in the MMSID. Only numbers 0~9 are allowed in the
MMSID.
•
Press the next microphone number key or push the
SELECT/ENT
knob to store
the selected digit and move the cursor to the next digit position.
•
Continue to select and store digits until the complete MMSID is entered. After
the last MMSID digit is entered, the cursor returns to the name line of the display.
•
If the name and ID are correct for this directory entry, press and hold the
key to save the data and exit. The directory list appears in the display showing
the new entry by name only. The MMSID does not appear in the directory list.
Summary of Contents for MT-700
Page 1: ...OWNER S HANDBOOK MT 700 MENU...
Page 81: ...80 MT 700...
