M-tech MT-700, Owner'S Handbook Manual

Page: 38 / 82

MT-700
37
the lower line of the display completing the entry.
•
Press the key to return to the Main display.
Follow the above procedure to enter your Group ID number. Group ID entry
attempts are not limited in number.
ATIS SET
See the
9.1 ATIS SET
topic of
9. ATIS OPERATION
section.
TIME SET
Allows selection of either 12 or 24 hour time format and provides entry of local time
offset from Universal Coordinated Time (UTC), sometimes called Greenwich Mean
Time (GMT). UTC is the time at the Prime Meridian, or zero degrees (0
ﾟ
) Longitude
which passes through Greenwich, England.
•
Press and hold the key. Menu topics appear in the display.
• Use the SELECT/ENT knob to position the cursor on the TIME SET topic.
•
Push the
SELECT/ENT
knob. The
TIME FORMAT
menu appears in the display.
INT
TIME FORMAT
>12 HR.
24 HR.
88:88 +
Format Selection
• Use the SELECT/ENT knob to select the desired format, either 12 HR or 24 HR .
•
Push the
SELECT/ENT
knob. The
TIME OFFSET
menu appears in the display.
INT TIME OFFSET
>+00.0
88:88
Time Offset Selection
• Use the SELECT/ENT knob to set the time difference from the Prime Meridian to
your location. If you are West of the Prime Meridian, select a negative (-) value.
If you are East of the Prime Meridian, select a positive (+) value. Time offset
values from 0 to 12 hours plus or minus may be entered in 1/2 hour increments.
Obtain the time offset value from your GPS navigator.