5. COMPONENT IDENTIFICATIONS
T6
T7
T8
DB
DA
DG FG SLD
A
F G
B
C
D
E
H
NAME
FUNCTIONS
A
Power terminal block
For power input
B
Network terminal block
For wiring to CC-Link
SETTING
BAUD RATE
C
Baud rate setting
0
1
2
3
4
Other than 0 – 4
156 kbps (factory default)
625 kbps
2.5 Mbps
5 Mbps
10 Mbps
Not valid; L ERR. turns on as a transmission error.
D
Station No. setting
Ver. 1.10: Selectable within 1 – 61. (factory set to: 00)
Ver. 2.00: Selectable within 1 – 64. (factory set to: 00)
ID (color)
FUNCTIONS
E
Status indicator LED
L RUN (red)
ON:
Blinking :
OFF:
Normal communication
Transmission data error
Communication down (time-out error)
L ERR. (red)
ON :
Blinking :
OFF:
Transmission data error
Transmission data error
Normal transmission
SD (red)
ON when transmitting
RD (red)
ON when receiving
ID (color)
FUNCTIONS
F
Power LED
PWR (green)
ON:
Blinking, high speed:
Blinking, low speed:
Abnormality
CC-Link Ver. 1.10
CC-Link Ver. 2.00
Master Version 2.00 with long ON time
Master Version 1.10 with long OFF time
G
Configurator jack
2.5 dia. miniature jack; RS-232-C level
H
Specifications
Display(s) serial No., model No., etc.
6. INSTALLATION
■
DIN RAIL MOUNTING
Set the body so that its DIN rail adaptor is at the bottom. Pull down the DIN rail
adaptor.
Position the upper hook at the rear side on the DIN rail and push in the lower. Push
back the DIN rail adaptor.
■
WALL MOUNTING
Set the body so that its DIN rail adaptor is at the bottom. Pull down the DIN rail
adaptor.
Refer to “EXTERNAL DIMENSIONS.”
DIN Rail Adaptor
DIN Rail
35mm wide
R1C-GH
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-5956 Rev.11 P. 5 / 13
