M-system R1C-GH, Instruction Manual

Page: 11 / 13

12. PARAMETERS SETTING BY PLC PROGRAM
12.1. GENERAL DESCRIPTION
The ladder diagram below shows a program example assuming that the master station’s first I/O number
is X/Y20 to 3F.
For detailed information, refer to users manuals for the PLC CPU and the Master Unit.
X0020
Only when required
Number of connected
modules
Number of retries
Number of automatic
return modules
Operation specification
when the CPU is down
Reserved
station
specification
X002F
M0
M1
PLS M0
SET M1
RST M1
MOV D0
MOV D1
MOV D2
MOV D3
MOV D4
MOV D5
MOV D6
MOV D7
MOV D8
MOV D9
MOV D10
D11 MOV
D13
D
MOV
MOV
T0 H0002 H0001 D0 K3
T0 H0002 H0006 D3 K1
T0 H0002 H0010 D4 K8
T0 H0002 H0020 D13 K
M1
M1
Invalid
station
specification
Station information
(set for the number of
connected modules.)
* 1
*
1. 14xx
where xx = R1C Station No.
R1C-GH
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-5956 Rev.11 P. 11 / 13