45
DL8 USERS
MANUAL EM-7691-B Rev.24
7.3.2 BASIC SETTING
After channel assignment, configure basic settings for each channel. Click [OK] to temporarily save the settings.
1.Click
PARAMETER
DESCRIPTION
CH name
Enter the name for channel (max. 32 characters).
CH comment
Enter comment regarding channel and tag name (max. 64 characters).
Invert logic
ON/OFF of input signal and ON/OFF for application signal are reversed, put a check
mark into check box.
Status
(ON)
(OFF)
• Display comment
Set text strings corresponding to ON/OFF, respectively (max. 16 characters).
• Color
Set respective colors for ON and OFF to show the status on the web browser.
• Event log
Set whether or not to record in the event log view of web browser when the input state
changes.
To record put a check mark in the check box.
• ON delay time, OFF delay time (Range: 0 to 999 sec.)
Set delay time in second for ON/OFF respectively.
Counter
• Mode
The DL8 has a function which realizes DI as slow pulse (detection interval: 1 sec.).
Choose from below the mode for the function.
Disable: DI is not used as counter
ON: ON time of DI is accumulated in second
OFF: OFF time of DI is accumulated in second
UP: Numbers of rising edge of DI are accumulated
DOWN: Numbers of falling edge of DI are accumulated
• Engineering unit
Set an engineering unit. It is available to set within 16 characters.
• Color
When counter value exceeds the event value, set the color displayed in the web
browser. (continued to next page)
• Event log
When counter value reaches event value, Set whether or not to record in the event log
view of web browser. To record put a check mark in the check box.
• Event triggered per (XX counts)
Set a count value that initiates an event, in numerical number (0 to 4294967295).
• Event message
Set a text string displayed in the event log view when the count reaches the event value
(max. 64 characters).
• Reset count
The counter can be reset when the count value reaches the event value.
To reset, put a check mark in the check box.