89
DL8 USERS
MANUAL EM-7691-B Rev.24
8.8.2 SETTING
(1) Connect the DL8 with the COP-US cable to the PC to which the DLCFG is installed.
For connection setting, refer to 4.3 IP ADDRESS SETTING.
COP-US
CFG
DLCFG
(2) Start the DLCFG to show the main window.
Click [Download from device] button to read setting from the DL8 and to open “Configuration” window.
Click [Communication] − [Web server] to open “Web server” dialog.
Configuration
Communication
Web server
1.Click
2.Click
Main Window
3.Click
(3) Configure the cloud mode parameters according to the table below.
PARAMETER
DESCRIPTION
Mode
Enable/Disable the cloud mode.
Protocol
Select the protocol between FTP and FTPS to be used for uploading web page files to the FTP
server.
Explicit mode when FTPS is selected.
Server address
Specify domain name or IP address as the address of the web server.
Login ID
Specify FTP login name for the web server.
Password
Specify FTP login password for the web server.
Subfolder
Specify sub-folder name such as “m1” of 8.8.1 DESCRIPTIONS.
If this is left blank, data is transferred to root directory.
Interval
Specify the interval of uploading data files to FTP server for web.
Select from: 1 / 2 / 5 / 10 / 30 min. / 1 hr / 1 day
Offset (min., sec.)
In order to avoid overloading when multiple DL8 units start data transfer at once, specify certain
time delays for each device, in minutes and seconds.
Time of day (hour)
When the interval is set to 1 day, specify the timing to transfer between 0 to 23 hours.
(4) Click [OK] to temporarily save the setting.
To apply the new setting to the DL8, go back to “Configuration” window and click [Upload to device] button.
