48
DL8 USERS
MANUAL EM-7691-B Rev.24
(3) Set parameters according to the table below.
PARAMETER
DESCRIPTION
Measuring mode
(Module)
Set the type of 32-bit data read from I/O module. Choose from below.
• Accumulation
The difference from the time at start and time at reset is accumulated for every sampling.
The mode corresponds to counter data of remote I/O. When pulse input module is used choose
the mode.
• Engineering unit value
Signed 32-bit integer value is identified as sampling data as it is.
7.4.1.2 ASSIGNING REMOTE I/O TO PI
(1) Refer to 6.1.2 ASSIGNING REMOTE I/O to assign remote I/O slaves.
1.Click
2.Double click
Slave setting
Input/Output
3.Enter
Slave setting dialog
4.Click
(2) Open “PI” configuration dialog.
Input/Output
Pulse input (PI)
PI Configuration dialog
2.Double-click
1.Click