52
DL8 USERS
MANUAL EM-7691-B Rev.24
7.4.1.4 ASSIGNING ANALOG ACCUMULATION TO PI
(1) Open “PI” configuration dialog.
Input/Output
Pulse input (PI)
PI Configuration dialog
2.Double-click
1.Click
(2) Set “CH setting” to “Analog accumulation.”
1. Select “Analog accumulation”
(3) Set parameters according to the table below.
PARAMETER
DESCRIPTION
Analog accumulation
• AI CH No.
Select AI CH to use for accumulation. Choose among AI1 to AI32.
• Counter rate
Set the number of counts you need the module counts with continuous 100% status for the time
unit.
• Time unit
Choose among Minute / Hour / Day.
• Low-end cutout
The lower limit value for AI sampling data (-2000 to 12000)