47DV
P. 25 / 34
EM-9501-B Rev.6
...
...
...
...
PARAMETER
Averaging time
Low-end cutout
Low-end cutout value
*
3
Display color
Automatic return time to
Measuring Mode
Manually exiting from the setting mode
...
Specify in seconds
Green (normal) to Red (alarm)
Low-end cutout value setting
Low-end cutout ON
Low-end cutout OFF
Low-end cutout by absolute value
8 samples
4 samples
32 samples
16 samples
64 samples
128 samples
256 samples
512 samples
2 samples
Red
...
Red (normal) to Green (alarm)
Green
No averaging
FUNCTION
DEFAULT
VALUE
MAIN DISPLAY
SUB DISPLAY
Averaging type
Moving average
Simple average
Manual subdisplay reset
*
5
Alarm setpoint display manually reset
Alarm setpoint display automatically reset
Transition time to
Lockout Setting Mode
Specify in seconds
...
Specify in seconds
Startup timer
Specify in seconds
OFF timing delay
*
2
Specify in seconds
ON timing delay
*
1
Specify in seconds
Event trigger mode
Sampling hold
Peak hold
Valley (Bottom) hold
Peak-to-peak hold
Normal
Display refreshing rate
*
4
Note 1: Alarm trip may not react to the input signals changing faster than the display refreshing rate.
*
1. Not selectable when the event trigger is set to Normal mode.
*
2. Not selectable when the event trigger is set to Normal or Sampling Hold mode.
*
3. With the cutout set to OFF, the low-end cutout value setting is locked.
*
4. 00.0 = 50 msec. refreshing rate
*
5. Selectable only at Advanced Setting Lockout Level LV0.
*
6. Latched output is reset when the latching is set to OFF while the output is latched.
*
7. P status/output is not latched.
...
Latching alarm
*
5,
*
6,
*
7
No latching
Output latched / measuring stopped
Output latched / measuring continued
Alarm power ON delay
*
5
Specify in seconds
No P output
Alarm setpoint HH
Alarm setpoint H
P output
*
5
Alarm setpoint L
Alarm setpoint LL
■
PARAMETERS LIST
