47DV
P. 16 / 34
EM-9501-B Rev.6
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
PARAMETER
Input type
Input scaling value Zero
Display scaling value Zero
Input scaling value Span
Bargraph type
Display scaling value Span
Decimal point position
Input scaling value zero: Input value for Zero point (Input scaling value zero
<
Input scaling value span)
Display scaling value zero: Display value for Zero point
Input scaling value span: Input value for Span point
Display scaling value span: Display value for Span point
Decimal point position: Decimal point position is specified independently from the scaling. When you set the display scaling, include
zeros for fractions (100000 to show 100.000).
Bargraph type, Bidirectional bar: The bar shows deviation in both directions from the middle point between the upper and the lower limits.
Analog output function mode: Forced zero, tare adjustment, low-end cutout, display refreshing rate, round off low-digit reading and high
pass filter are applied to the display value, thus affecting the analog output when the mode is set to ‘Proportional to
the display value.’ The input signal with scaling and averaging directly affects the analog output with ‘Proportional
to the scaling value’ setting.
Analog output 0% / 100% adjustment: Pressing [Shift] button switches the signal to increase or decrease, and then pressing [Up]
button controls it toward the desired output value. Analog output 0% + 5% ≤ Analog output 100%
4 positions or none
Decimal point position
No bargraph
Display value for Input Scaling Value Span
Bargraph lower limit
Bargraph upper limit
Bargraph upper limit
Bargraph lower limit
Analog output 0%
Analog output 100%
Display value for Analog Output 100%
Display value for Analog Output 0%
Analog output 0%
adjustment
Analog output 100%
adjustment
Unidirectional bar (reverse LCD)
Unidirectional bar
Bidirectional bar (reverse LCD)
Bidirectional bar
Input value for Full-scale point:
Set to a specific value by using the
buttons, or by Teach Calibration
Display value for Input Scaling Value Zero
Input value for Zero point:
Set to a specific value by using the
buttons, or by Teach Calibration
Measuring range 4 to 20mA
Measuring range 0 to 20mA
Measuring range ±200mA
Measuring range ±20mA
Measuring range -5 to +5V
Measuring range 1 to 5V
Measuring range ±200V
Measuring range ±20V
Analog output type
Output range 4 to 20mA
Output range 0 to 20mA
Output range -5 to +5V
Output range 0 to 5V
Output range -10 to +10V
SUB DISPLAY
FUNCTION
DEFAULT
VALUE
MAIN DISPLAY
(increasing)
(decreasing)
(increasing)
(decreasing)
Analog output
function mode
Proportional to the display value
Proportional to the scaling value
/
/
/
/
/
/
/
Analog output 0% adjustment:
adjustable range -5 to 100%
Analog output 100% adjustment:
adjustable range 0 to 105%
0% output
(default value)
100% output
(default value)
■
PARAMETERS LIST
