47DV
P. 12 / 34
EM-9501-B Rev.6
POWER ON
Measuring Mode
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Scale/ button
for ≥3 seconds
Measuring
■
GENERAL SETTING FLOWCHART
Measuring stopped
*
2
Mode transition
Scaling Setting Mode
Alarm Setting Mode
Advanced Setting Mode
Hold down Alarm/ or Scale/
button for ≥1 second
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Max/Min + Alarm/ buttons at once
for a preset time duration
*
1
Hold down Alarm/ + Scale/ buttons at once
for ≥3 seconds
Lockout Setting Mode
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Alarm/ button
for ≥3 seconds
Modbus Setting Mode
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Alarm/ + Shift buttons at once
for ≥3 seconds
Infrared Communication
Setting Mode
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Alarm/ + Up buttons at once
for ≥3 seconds
Loop Test Output Mode
Hold down Alarm/ or Scale/ button
for ≥1 second
Hold down Alarm/ + Scale/ + Shift buttons at once
for ≥5 seconds
*
1. Preset time can be specified with “Transition Time to Lockout Setting Mode” in Advanced Setting Mode.
*
2. The last measured values or status are held for DC and alarm outputs, and the BCD output is indefinite while the
measuring is stopped. (except for the analog output adjustments in the Loop Test Output Mode and the Scaling Setting Mode)
You do not have to go through all the modes. Use only necessary ones.
