63
47DR OPERATING MANUAL EM-9509-B Rev.7
(6) Parameter shifting in Lockout Setting Mode
In Lockout Setting Mode, pressing Alarm/
↓
button shifts one parameter to the next (clockwise in the following figure).
Pressing Init/
↑
button shifts one to the previous (counterclockwise).
NOTE
• The display depends on the specifications and settings. The above displays show default values.
• Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode from each parameter.
(7) Parameter shifting in Loop Test Output Mode
There is no parameter shifting in this mode.
Measuring Mode
Initial setting lockout
Advanced setting lockout
Initialization
at once for a preset time duration
Hold down Max/Min + Alarm/
↓
*
1 Enabled with the I/O option code ‘4’ , ‘7’ or ‘8’ (network interface).
Alarm setting lockout
Loop test output lockout
Modbus setting lockout
*
1
Lockout Setting Mode
MAX/MIN display control
lockout
IR communication lockout
Modbus communication lockout
*
1
