62
47DR OPERATING MANUAL EM-9509-B Rev.7
(4) Parameter shifting in Modbus Setting Mode
In Modbus Setting Mode, pressing Alarm/
↓
button shifts one parameter to the next (clockwise in the following figure).
Pressing Init/
↑
button shifts one to the previous (counterclockwise).
NOTE
• The display depends on the specifications and settings. The above displays show default values.
• Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode from each parameter.
(5) Parameter shifting in Infrared Communication Mode
There is no parameter shifting in this mode.
Measuring Mode
Device address
Baud rate
at once for ≥ 3 sec.
Hold down Alarm/
↓
+ Shift
Modbus Setting Mode
Parity bit
Stop bit
T1.5 timer
T3.5 timer
Long register
