69
47DR OPERATING MANUAL EM-9509-B Rev.7
5
Press Shift button to shift the display into the setting standby
mode. Then press Shift and Up buttons to set the bargraph
upper limit.
• The sixth digit starts blinking, to which you can apply changes.
• Set within the range of -999.99 to 9999.99.
NOTE
Set to 2 decimal places regardless of the decimal point position setting.
6
Press Alarm/
↓
or Init/
↑
button to apply the new value.
• The bargraph upper limit is registered and the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the input type will be indicated (‘RTTYPE’ on the SD), or the analog output type will be indi-
cated (‘ANG TYP’ on the SD).
• Press Init/
↑
button, and the bargraph lower limit will be indicated (‘BAR-L’ on the SD).
7
Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode.
Blinking