S600D USER AND MAINTENANCE MANUAL
88
1.
If a toolhead is present, remove it from the machine, (see sections 5.2.4 or 6.2.4).
2.
Power off the machine.
3.
Unscrew the 4 knurled nuts (1) on the material bay that is in currently in the machine (if this is
the case).
4.
Use the handles to pull the material bay out of the machine.
5.
Install the liquid material bay with the help of the guide brackets (8). Push it in until it touches
the wall of the machine.
6.
Tighten the 4 knurled nuts (1).
7.
Power on the machine.
8.
Connect the air inlet to a compressor (not pressurized)
9.
You can now mount a toolhead that is compatible with the liquid material bay (see section
6.2.3).
All manuals and user guides at all-guides.com
