S600D USER AND MAINTENANCE MANUAL
5
FFF
: Fuse Filament Fabrication, the 3D printing process used by this machine and based on
the principle of depositing melted material in layers.
3D Printing
: An additive manufacturing process.
Delta Geometry:
A robot architecture with 3 parallel axes that moves in a three -dimensional,
cylindrical space.
Toolhead:
Tool carried in the toolholder affecting raw material state to dispense it to generate
the part.
Extruder
: Motorized part that feeds the build material (filament) into the toolhead.
Hotend
: The lower part of the toolhead that reaches high temperatures. Do not touch the
hotend during operation; risk of burns.
Coldend
: The upper portion of the toolhead that is actively cooled to limit heat spreading from
the hotend.
Nozzle:
Cone-shaped metallic part located at the lowest tip of the hotend. The diameter of
the nozzle determines the extrusion width and restricts the maximal layer height.
Heated build plate
: Build platform located in the lower portion of the machine. Hot zone,
hazardous during operation. Ensures maximum adhesion of the print. Prevents warping and
layer delamination.
G-code
: Standard machine command language used by the S600D.
Firmware:
Computer code flashed onto the machine controller board.
Slicer
: Computer software that generates G-code from a 3D file.
STL
: 3D file format commonly used for 3D printing.
Autoleveling:
Automatic calibration and leveling of the print bed.
All manuals and user guides at all-guides.com
