S600D USER AND MAINTENANCE MANUAL
87
The S600D comes with a modular material supply system called the material bay. Depending on the
manufacturing process you are using you must change both the material bay and the toolhead. The
material bay must be used with toolheads that use the same manuf acturing process. In this case,
liquid deposition toolheads.
The material bay is equipped with two pneumatic outlets for the liquid deposition toolheads and
requires a compressor (not supplied, maximum pressure 8 bars).
The main electrical wiring cable runs between the material bay and the toolhead.
Knurled nuts
Manometer outlets 1 and 2
Pressure settings for outlets 1 and 2
Manometer air supply
Quick-connect electrical connecter
–
link to
toolhead
Quick-connect electrical connecter
–
link to
machine
Air compressor inlet
–
Pneumatic tube fitting
ø10mm
All manuals and user guides at all-guides.com
