Luxinar SR 10 AOM, User Manual

Page: 21 / 75

Table 6 - Coolant specification — laser
Model SR 10 AOM SR 25 AOM
Minimum flow rate (L/min) 4 5
Recommended flow rate (L/min) ≥ 6 ≥ 6
Maximum pressure 6bar
Dissipation 3kW 5kW
Required refrigeration capacity > 3kW > 5kW
Coolant temperature (laser) 18–25°C ± 1°C (above dew point)
Refer to document 906-0202-99 for more details.
Table 7 - Coolant specification — AOM module
Model SR 10 AOM SR 25 AOM
Minimum flow rate (L/min) 2 2
Recommended flow rate (L/min) ≥ 3 ≥ 3
Maximum pressure 3bar
Dissipation 0.45kW 0.5kW
Required refrigeration capacity > 0.45kW 0.5kW
Coolant temperature (AOM) 18–20°C ± 1°C (above dew point)
2.3.5. Optics purge gas
Table 8 - Optics purge gas specification
Purge gas pressure 0.07–0.21bar (1–3psi)
Flow rate 1–2L/min
Nitrogen purity
Nitrogen purity grade ≥ 4.6 (O
2
≤ 3vppm, H
2
O ≤ 2vppm )
Compressed air contamination limits
Oil ≤ 0.005mg/m
3
Water ≤ 0.05g/m
3
Particles ≤ 0.05µm
2.3.6. Environmental specifications
Note: This equipment is designed for indoor use only and Pollution Degree 2 as defined within EN
61010-1:2010+A1:2019
Table 9 - Environmental specifications
Ambient working temperature 5–30°C
Storage temperature (with drained cooling circuit) -10 to +30°C
Relative humidity (non-condensing) 10–85%
Maximum altitude < 2000m
906-0227-00 REV 1 13 2. General Description