WARNING
Risk of optical damage and shutter failure
To ensure correct operation of the laser and shutter, the laser must be mounted in one of the
approved orientations identified by check marks in the following figure. All other orientations are
prohibited.
X
X
X
X
X
X
Figure 14 - Correct and incorrect mounting orientations
6.2.2. Laser output aperture location
87.3
70.0
6.2.3. Coolant connections and pipework
The laser tube/DC power supply and the AOM module are served by independent cooling water circuits
which are each protected by separate flow sensors. This provides two scenarios for cooling the system:
906-0227-00 REV 1
25
6. Installation
Summary of Contents for SR 10 AOM
