ISSUE DATE: FEBRUARY 2018
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2015
APPROVED BY: S. GONZALEZ
PAGE 29 OF 38
PRODUCT INFORMATION MANUAL
SECTION: 12 LUMINETTE PRIVACY SHEERS
Attach the End Treatment(s) to the Swivel Plate(s)
■
Hold the end treatment near the swivel plate at a height where
the end vanes hang straight and the top of the end treatment is
approximately 3mm above the top of the swivel plate.
■
Attach the end treatment by pressing it onto the
swivel plate.
■
If the end treatment is not hanging straight, separate the swivel
plate from the end treatment and reposition it. Separate the swivel
plate by pulling up on the end treatment while holding the swivel
plate in place.
■
Re-attach the end treatment. Repeat the adjustment as necessary.
Swivel
Plate
