ISSUE DATE: FEBRUARY 2018
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2015
APPROVED BY: S. GONZALEZ
PAGE 21 OF 38
PRODUCT INFORMATION MANUAL
SECTION: 12 LUMINETTE PRIVACY SHEERS
➤
For extension bracket installation, you may cut off any unneeded length (before mounting) at
indentations stamped into the brackets between each set of holes. Each two-hole section is 13mm
in length.
IMPORTANT:
For proper operation, the SofTrak
™
headrail must be mounted level. Use a laser level
to check that the spacer blocks or extension brackets are level and aligned. Shim the brackets if
necessary. The brackets may also need to be shimmed if the mounting surface is heavily textured.
To Shim the Brackets:
➤
Loosen the installation screws securing the spacer
block or extension bracket.
➤
Insert one or more shims between the spacer block or
extension bracket and
the mounting surface. Tighten the installation screws.
Finish Bracket Assembly
Spacer Blocks
■
Add any additional spacer blocks required.
IMPORTANT:
A maximum of four spacer blocks can be used.
■
Hook the top of the faceplate to the front spacer block and snap
it into place.
Level and
Aligned
Level and
Aligned
Loosen
Mounting
Screws
Insert
Shim(s)
1
2
1
2
To Shim
Installation Bracket
To Shim
Extension Bracket
Faceplate
