ISSUE DATE: FEBRUARY 2018
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2015
APPROVED BY: S. GONZALEZ
PAGE 13 OF 38
PRODUCT INFORMATION MANUAL
SECTION: 12 LUMINETTE PRIVACY SHEERS
Thank you for purchasing LUXAFLEX
®
LUMINETTE
®
Privacy Sheers with PowerView
™
Motorisation. With
proper installation, operation, and care, your new sheers will provide years of beauty and performance.
Please thoroughly review this instruction booklet and the packing list included with your order before
beginning the installation.
Tools and Fasteners Needed
■
Flat blade and Phillips screwdrivers
■
Measuring tape and pencil
■
Power drill, 3mm drill bit,
and 6mm hex driver
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided).
Two 38mm screws are provided per installation bracket.
■
Speed Nuts and Screws (Provided).
Extension brackets come with screws and speed nuts.
■
Drywall Anchors (Not Provided).
Use drywall anchors when mounting into drywall.
Unpack the Components
■
Make sure you have clean hands or wear disposable gloves when handling Luminette fabric. To avoid
wrinkling the fabric, do not fold it or drape it over furniture.
■
One or more fabric panels may be packaged in a carton.
■
The fabric panels are rolled around a cardboard tube. Do not remove the protective wrapping until
starting the “Attach the Fabric Panel(s)” step on page 16.
■
Remove the SofTrak
™
headrail system and installation hardware from inside the carton.
■
Remove the foam supports from the tilt shaft inside the
headrail. Rotate the supports in either direction until they can
be pulled off.
IMPORTANT:
With wider fabrics, the SofTrak headrail may
be shipped separately.
Remove
Foam Supports
■
Level (laser level is recommended)
■
Needlenose pliers
■
Utility knife and scissors
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
#6 x 38mm
Hex Head Screw
(Provided)
