ISSUE DATE: FEBRUARY 2018
ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2015
APPROVED BY: S. GONZALEZ
PAGE 28 OF 38
PRODUCT INFORMATION MANUAL
SECTION: 12 LUMINETTE PRIVACY SHEERS
Attach Swivel Plates
■
The end treatments on both ends of the sheer attached with
swivel plates.
➤
Swivel plates are right- and left-specific, marked by an R
or an L. The swivel plates are packaged with the product’s
hardware.
■
Snap the rivet on the swivel plate into the front clip on the
control end cap. Swivel plates attached on the left will have
STD
L
stamped on the top. Swivel plates attached on the right will
have
STD R
on the top.
■
Snap the rivet on the other swivel plate onto the swivel arm (side stack) or into the front clip on the
non-control end cap (split stack). Swivel plates attached on the right will have
STD R
stamped on the
top. Swivel plates attached on the left will have
STD L
on the top.
STD R
STD L
Swivel Plate
Side Stack
Swivel Arm
Rivet
Swivel Plate
Split Stack
Rivet
Front Clip
Non-Control
End Cap
STD
R
STD
R
Rivet
ST
D
L
