manualshive.com logo in svg

Lütze LION Series, Operating Instructions Manual

Share
Download
Lütze LION Series Operating Instructions Manual Download Page 7

LION I/O Modules 

▪

 General Information

7

2

General Information

2.1

Symbol Description

2.1.1

Safety Messages

The manual contains several safety messages. Each safety message contains a 
defined signal word and a color. The color and the word are referring to an alert 
level. There are 4 levels. The safety messages point out hazardous situations and 
give information to avoid those. 

2.1.2

Handling Notes

2.1.3

Special Notes

2.2

Copyright

This manual is intended for the operator and his staff. It is forbidden to give the 
content to a third party, to duplicate, exploit or impart it. The Lütze Transportation 
GmbH has to allow it explicit in writing.

General data, text, images and drawings are copyrighted and are liable to the 
industrial property right. Contravention can be prosecuting criminally. The named 
brands and product names in this document are trademarks or registered 
trademarks by titleholder. 

Indicates a hazardous situation which, if not avoided, will result in death 
or serious injury.

Indicates a hazardous situation which, if not avoided, could result in death 
or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor 
or moderate injury.

 

Is used to address practices, not related to personal injury.

Points out technical information.

Points out the use of tools.

SIL

relevant

LION-XXX

Points out a safety-related application condition.
These notes are marked with an ID for example: LION-001.
The IDs refer to the handling checklists in the system manual.

Summary of Contents for LION Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands