LION I/O Modules
▪
Safety
11
3.4
Operating Employees
Trained Employees
The employee was trained by the employer on the task and possible hazardous
situations. The employee does not have any technical knowledge.
Experts
The employee has a technical education, knowledge and/or experience in the
required field. The employee is capable to do specific operations on and with the
product.
Electrically qualified persons
The employee has a technical education in the required field. The employee is
capable to do special operations on and with the product.
The different sections of the manual refering to the qualification level of the
operating employees.
3.5
Responsibility of the Operator
The operator is obligate by the law of occupational safety, if the product is used
in a commercial field.
▪ The operator is responsible to train the employees and to inform himself about
the industrial safety regulation.
▪ The operator is responsible that safety, environment protection regulations
and rules for accident prevention are observed.
▪ The operator has to run a risk assessment at the working environment/place
of installation to expose hazards and to alert those.
▪ The manual has to be stored near the product.
▪ The manual has to be obeyed.
▪ The product can just be run in a faultless technical condition.
3.6
Protective Clothing and Equipment
3.7
Electrostatic Discharge (ESD)
Electrostatic discharge can destroy electronical components by voltage and
energy, which are not noticeable by humans. Damages can occur if an
electronical component is touched by an electrostatic discharged person.
Modules will not immediately recognized as malfunctioned, the maloperation will
occur after a longer operating time.
Risk of injury by deploying insufficient qualified operating employees.
Inappropriate appoint of not qualified or insufficient personnel can cause
property damages and personal injuries.
▪ Tasks which apply special procedures should be done by trained and
qualified employees or experts, especially electricians.
▪
Destroyed parts and malfunction of the product.
Inappropriate clothes
can cause electrification and can damage the product. If working with or on
the components, wear special ESD clothing.
▪ Also follow the instructions and regulations of the employer.
