Internal:
This input option allows you to use the output of another process engine, this allows you to make an even
more complex setup.
Use the dropdown menu to select which process engine you want to use as input.
For a better identification of the source, you can add a text to your Internal source.
Play:
This input option allows you to use the recorded cues from internal shows as an input to the process
engine.
First select which show you want to use, then select the process engine that you want to use. All the
process engines of the LumiCore are always available to choose from.
For a better identification of the source, you can add a text to your Play source.
Select the control channel you want to use to control the cue list. Use the cog wheel to set the source
protocol and universe and if required a specific controller IP.
Control channel options:
8 - 15:
Go
, play the next cue in the cue list.
16 - 23:
Forward
, pre-set the next cue. This allows you to trigger forward for example twice to skip a cue.
24 - 31:
Back
, pre-set the current cue again. To go to the previous cue, you need to trigger this option twice.
32 - 39:
Reset
, reset the cue list to the first cue in the list.
OUTPUT
A process engine offers the following outputs or a combination of all available options:
Art-Net:
All data handled by the process engine can be sent back to the network as a new or the same Art-Net
universe.
Here you can set the universe number you wish to use. You can specify the IP address of the destination,
6 | lUmICore In DetaIl
30