3.5 toolbox page
The toolbox page is divided in three sub menus:
PROFILE MANAGER
Here, you can recall, save, import, export or delete a profile. Select the profile with the drop-down menu
located on the left hand-side. The LumiCore comes with default profiles that can be used or modified, for a
fast setup time. Up to 40 profiles can be stored in a unit.
Once a profile is selected, a preview of the configuration is shown below the dropdown in graphic form and
the configuration of each process engine.
When a profile has been selected the user can scroll down to the bottom of the profile preview to see the IP
settings in this profile. By default, the LumiCore will NOT load the IP settings that are stored in the profile. If
you want to load the IP settings saved in the profile, slide the Preserve IP settings to OFF.
FIRMWARE
In the firmware section, you can see two versions of firmware:
Active firmware is the one currently running on the unit.
Alternate firmware is the previously installed firmware.
If you would like to downgrade the unit to the previously installed firmware, click on the Activate button.
The unit will reboot in this firmware.
There is only ONE firmware version for the entire range. This can be installed on all different models in the
range.
You can upgrade the LumiCore with our latest firmware. To upgrade the unit, please apply the following
procedure:
Download the latest firmware from the support section of our web site,
Extract the downloaded archive and have a look at the release notes included.
Click on the firmware upgrade button in the web-UI of your device.
3 | ConfIGUratIon
22
