b
a
C
D
e
f
G
H
I
J
K
WEB INTERFACE PRESENTATION
Launch your favourite web browser and type the IP address of your LumiCore. Press
enter
to validate.
3.1 node Page
(A) Identify
: Clicking on the Luminex logo will identify your LumiCore in the network. The LCD display will
turn green and the Mode LED will flash green for 5 seconds. In the web-UI you get the text “Identified”
under the logo and the LCD area will change colour.
(B) Drawing of your LumiCore
: A product drawing of the LumiCore.
(C) Navigation menu
(D) Input
: According to the mode set on the process engine, the input block will display all relevant
information, such as the type of incoming protocol, the universe number and the source IP address.
(E) Process engine
: By default, the LumiCore comes with Forward mode to sACN activated on all process
engines. The block displays the mode currently set on the process engine; you can change the name.
On the left and on the right-hand side of the process engine, are respectively the patch, master/limit
and startup icons. The colour of the icon will change if any parameters of these menus are modified.
For more details about the process engines and how to configure them please see chapter 6 of this
manual.
(F) Output
: The output block will display all relevant information, such as the type of outgoing protocol,
the universe number, and the destination IP address.
(G) Increment/Decrement
: Use these shortcuts to quickly increase or decrease the value of a universe.
Select the process engine first, after which the increment/decrement tool becomes available.
(H) Reset tool and padlock
: Use this tool to reset one or several process engines. First select the process
engine(s) by clicking on the top left corner of the input block followed by the trashcan icon. The
padlock allows you to lock the LumiCore configuration page to prevent unsolicited action on the web
page. This is an ideal tool for show time.
(I) Active Profile
: In this area the current active profile of the LumiCore is being displayed.
(J) Theme and language
: Select here if you want to use the dark theme or light theme. Interface
supported languages are English, Japanese and Chinese for now.
(K) Help
: In case you need help, here you find an onboard helpfile.
12
3. Configuration
