Lukhan LK-B10, Command Manual, Page: 92 / 135

91
Q Command - Set Form Length
Description Use this com mand to set the form and gap length or
black line thick ness when us ing the transmissive
(gap) sen sor, black line sen sor, or for set ting the
printer into the continuous me dia print mode.
The
Q com mand will cause the printer to re cal-
cu late and re for mat im age buffer.
Syntax
Qp
1
, p
2
[±p
3
]
Parameters
p
1
= Label length measured in dots
Default: Set by the AutoSense of media.
Max i mum Value : 65535 (dots)
• Distance be tween edges of the label or black
line marks.
•
For con tin u ous mode, the p
1
pa ram e ter sets
the feed distance be tween the end of one
form and be ginning of the next.
p
2
= Gap length or thick ness of black line
Range : 16-240 (dots) for 203 dpi printers
[18-240 (dots) for 300dpi print ers]
Gap Mode
- By de fault, the printer is in
Gap mode and pa rameters are set with
the me dia AutoSense.
Black Line Mode - Set p
2
to B plus
black line thick ness in dots. See the
Gap mode range.
Con tin u ous Me dia Mode
Set p
2
to 0 (zero)
The transmissive (gap) sen sor will be
used to de tect the end of me dia.
±p
3
=Off set length mea sured in dots
• Required for black line
mode op er a tion.
• Optional for Gap de tect or con tinuous media
modes. Use only pos itive off set val ues.
980352-001 Rev.D
3-91