120
Y
Command - Serial Port Setup
Description
Use this com mand to es tablish the se rial port
com mu ni ca tion pa ram e ters.
Syntax
Yp
1
,
p
2
,
p
3
,
p
4
Parameters
p
1
= Baud rate
p1
De scrip tion
38
38,400 baud (38K)
19
19,200 baud
96
9,600 baud
48
4,800 baud
24
2,400 baud
12
1,200 baud
p
2
= Par ity.
Values:
O
= Odd par ity
E
= Even par ity
N
= No par ity
p
3
= # Data bits.
Values:
7
= Seven data bits
8
= Eight data bits
p
4
= # Stop bits.
Values:
1
= One stop bit
2
= Two stop bits.
After re ceiving this com mand, the printer will
au to mat i cally re set en abling the new rate.
To send com mands and data to the printer, the host’s
serial port pa rameters must match the printer’s serial
port pa ram e ters. Ver ify the printer’s con fig u ra tion set-
tings with the AutoSense/Dump Mode Printout, see
the printer’s user’s man ual for details.
The printer’s de fault se rial port pa rameters are
:
9600 baud, No Par ity, 8 Data Bits, 1 Stop Bit
Change the printer’s se rial port pa rameters with the
Y
com mand af ter com mu ni ca tion has been es tab -
lished with the host. The host pa rameters must then
be changed to re sume com mu ni ca tion.
Example:
Y19,O,7,1
�
:sets 19,200 baud, odd par ity,
:7 data bits and 1 stop bit.
980352-001 Rev.D
3-121
Summary of Contents for LK-B10
Page 2: ......