80
oR
Command - Character Substitution (Euro)
Description
This command allows the advanced program-
mer to substitute the Euro currency character
for any ASCII character in printer resident font
numbers 1-4.
The second function this command supports is
the zero character style toggling between a plain
zero character and a zero with a slash.
Character substitution settings are stored in the
printers non-volatile 'flash' memory. The origi-
nal character can be restored by sending the
oR
command without a parameter.
Syntax
oR
[
p
1
,
p
2
]
Parameters:
p
1
=
E
If the
p
2
parameter is not provided,
then the Euro character will map to
code page position 213 decimal (D5
hexadecimal) for all code pages.
p
1
=
0
(zero)
Toggles the zero character:
slash — no slash (out of box default)
p
2
= Decimal number
Range
:
0
to
255
The active code page’s ASCII character
map position to be replaced by the Euro
character. The Euro character will be ac-
tive in this map position for all code
pages. See the I command for details
on code page selection.
None
= No Parameters (
p
1
/
p
2
) resets to all
code pages to original default character
mapping.
Optionally, to reapply normal character opera-
tions, issue a
o
(111 dec. or 6F hex.) command.
See page 3-74 for important details on the ef-
fects of using the
o
command.
The Euro character is not supported in Font 5 char-
acter set.
3-80
980352-001 Rev.D
Summary of Contents for LK-B10
Page 2: ......