Lukhan LK-B10, Command Manual, Page: 47 / 135

46
ES Com mand - Store Soft Font
a
1
: (1
st
) Down load Char ac ter (map po si tion)
Range: 00 to FF hex.
b
1
: (1
st
) Spacing To Next Print Character
Down loaded char ac ter’s next printed
character position in dots, i.e. Character
tracking - the space between characters.
Must be greater than or equal to the
character width, see parameter c
1
. Dots
in a dec imal num ber converted to a
hex a dec i mal num ber.
Range: 00 to FF hex.
c
1
: (1
st
) Down loaded Char ac ter’s Width
Dots in a decimal num ber converted to
a hex a dec i mal num ber.
Range: 00 to FF hex.
“DATA
1
” : (1
st
) Char ac ter Bitmap
p
3
× c
1
= bit map data (in bytes)
Data is re ceived in bytes, on a line by
line ba sis. The font char acter’s 0,0 cell
map po sition is in the top left cor ner of
the map as viewed in the 0 de gree rota-
tion. See the ex amples on the fol lowing
pages.
a
2
: (2
nd
) Down load Char ac ter (map po si tion)
b
2
: (2
nd
) Spacing To Next Print Character
c
2
: (2
nd
) Down loaded Char ac ter’s Width
“DATA
2
”
: (2
nd
) Char ac ter Bitmap
p
3
× c
2
bytes = bit map data
Repeat for each character un til the last char-
acter in the set is down loaded.
a
n
: (Last) Download Character (map po si-
tion)
b
n
: (Last) Spacing To Next Print Char acter
c
n
: (Last) Down loaded Char ac ter’s Width
“DATA
n
” : Char acter Bitmap
p
3
× c
n
bytes = bit map data
3-46
980352-001 Rev.D