Lucent Technologies Lineage
®
2000 25A Ferroresonant Rectifier J85502A-1
4 - 4 Safety
Issue 4 May 1998
•
In addition to proper job training and safety procedures,
always follow these basic precautions:
–
Use only properly insulated tools.
–
Remove all metallic objects (key chains, glasses, rings,
watches, or any other jewelry).
–
Wear safety glasses.
–
Test circuits before touching.
–
Lock out and tag any circuit breakers/fuses when
possible to prevent accidental turn on.
–
Be aware of potential hazards in the area you are
working before entering the equipment.
–
Identify exposed hazardous electrical potentials on
connectors, wiring, etc. (note the condition of these
circuits, especially any wiring).
–
Use care when removing or replacing any covers –
avoid contacting any circuits.
–
Use gloves when handling thermally hot components
inside the rectifier. Transformers are very hot after
sustained operation.
Warning
Statements and
Safety Symbols
The symbols may sometimes be accompanied by some type of
statement, e.g., “Hazardous voltage/energy inside. Risk of
injury. This unit must be accessed only by qualified personnel.”
This symbol identifies the need to refer to
the equipment instructions for important
information.
This symbol (or equivalent) is used to
identify the presence of hazardous ac
mains voltage.
