MEMORY
continued
Memory Card
There is a memory card with an erasable surface located on the telephone base
unit to record the names or telephone numbers for the first 10 (locations 01-10)
numbers stored in these memory locations.
Programming a Pause into a Memory Dial Phone Number
If your phone is connected to a PBX (switchboard) you may have to dial
a special number (e.g., 9) to get an outside line. When programming a number
into memory, store the access number and a pause into the number sequence.
The pause will allow the switchboard enough time to give you an outside line
dial tone.
To insert a pause in a stored number, press the [
HOLD
] key. This inserts a
2-second pause after that digit. To insert a longer pause, press the [
HOLD
] key
two or more times. Each time you hear another beep, it makes the pause 2
seconds longer.
For example, to store 9, PAUSE, 555-1234: Press [
9
], [
HOLD
]. Then press
[
5
][
5
][
5
][
1
][
2
][
3
][
4
].
NOTE: Each pause you program is counted as a digit. You can program up to
20 digits in each memory location.
Changing or Replacing a Stored Number
You can change or replace a stored number by storing a new number in
its place.
14
