LTT i.LASER Series, User Manual

Page: 93 / 93

Appendices
92
Appendix 3 Suggested Power and Speed Settings
The below settings are only intended to be starting points. Many variables can affect
actual settings. Different manufacturers have different formulations, laser tubes
differ in actual power output, natural materials vary greatly, and the user desired
results will drastically affect actual settings.
Laser Source : 30 Watt
Material Type Thickness Speed Power PPI DPI
Engraving 100% 20% 500/1000
3 mm 3% 100% 1000
5 mm 2% 100% 1000
Acrylic
Cutting
10 mm 0.5% 100% 1000
Anodized
Aluminum
Engraving 100% 40% 500/1000
Card Stock Cutting 40% 100% 250
Cermark Engraving 25% 100% 500
Ceramic Tile Engraving 60% 100% 500
Coated Brass Engraving 100% 50% 1000
Crystal Engraving 100% 30% 500
Engraving 100% 30% 500 Denim
Cutting 20% 100% 500
Glass Engraving 100% 50% 500
Granite Engraving 60% 40% 333
Laser Foil Cutting 50% 100% 1000
Engraving 100% 20% 1000 Laserable Plastic
Cutting 1.5 mm 8% 100% 500
Engraving 100% 70% 500 Leather
Cutting 2% 100%
Marble Engraving 60% 23% 333
Engraving 15% 100% 1000 Rubber Stamp
Cutting 4% 100% 500
Engraving 100% 100% 500/1000
3 mm 7% 100% 500
Wood
Cutting
6 mm 2.5% 100% 500