LTT i.LASER Series, User Manual

Page: 71 / 93

Chapter 3 Operation
70
11. The Raster Tuning settings for that material are now complete. If you feel that
you can tweak it a little more, use the Tuning setting you just set and the near two
Tuning values (the tuning 1 and the tuning setting-1) to engrave small
text. Compare each one to the other and find the one that is the sharpest and
clearest. Go back and set the TUNING value to the appropriate number and SAVE
your settings once again.
NOTE: If your system has a many hours or years of operation and your motion
system components are extremely worn, the tuning test sample may not show any
lines that are thin. If this is the case, mechanical component replacement may be
required. Please contact our Customer Service Department for assistance.
Sharpe Adjustment
The range of is from 9500 to 10500. The default setting 10000 means the vector
scales remain the original size without any scaling. When X axis's scale sets
10500, it means output will be multiplied by 1.05 times in x axis's direction. If
the value is out of the setting range, it will turn into the originally setting value:
X axis=10000, Y axis=10000 automatically. The Shape Adjustment is only
works with vector (cutting) drawings.