LTT i.LASER Series, User Manual

Page: 19 / 93

Chapter 2 Installation
18
5. Exhaust Port
These two ports can exhaust the smoke which is caused by cutting or engraving.
These ports have to be connected to blower through pipes
6. Rear Door
You can work on long materials through front door and this door. This door also has
no interlock sensors, so it is locked by screws for safety. If you open this door, the
system becomes a Class 4 laser device.
7. Air Filter
This part provides air assist through the hose which is connected to air compressor.
8. Fans
These parts can dissipate the heat in the chassis which is caused by laser generator.
9. Rear Door of Chassis
Mostly opening this door is for maintaining. Do NOT open this door if it’s not
necessary, especially the machine power is on.
10. Side Door (Left)
You can work on long materials through two side doors. These doors have no
interlock sensors, so they are locked by screws for safety. If you open these doors,
the system becomes a Class 4 laser device.
11. Side Door of Chassis
Mostly opening this door is for maintaining. Do NOT open this door if it’s not
necessary, especially the machine power is on.
6
9
7
10
11
5
8