LTT i.LASER Series, User Manual

Page: 5 / 93

Chapter 1 Safety
4
Chapter 1 Safety
1.1 Safety Regulation
The i.LASER series uses a CO
2
Laser as a light source. It is classified as a class-IIIR
product by CDRH (the Center for Devices and Radiological Health) .
Wavelength : 10.6µm
Maximum output power : 30 ~ 100W
Visibility : Invisible
When operating the i.LASER series, be sure to always comply
with the safety regulations as following:
Do not attempt to modify or disassemble any component of the machine without
LTT technical support.
Do not open the doors of chassis and access the laser tube or electronic
components, especially while the machine power is on.
Connect the machine to a grounded outlet. Verify that the voltage of the outlet
is correct for the machine.
Do not disable the interlocks which are on top and front doors.
Be careful about the path of the invisible laser beam shown in figure. Otherwise,
eye or skin injury may result.