LTS LTN8932-R User Manual Download

Page: 140 / 203

User Manual of 89XX-R Series NVR

139

11.2

Configuring Advanced Settings

11.2.1

Configuring DDNS

Purpose:

You can set the Dynamic DNS (DDNS) for network access.

Prior registration with your ISP is required before configuring the system to use DDNS.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

DDNS

tab to enter the DDNS Settings interface.

Check the

DDNS

checkbox to enable this feature.

Select

DDNS Type

. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and

HiDDNS.

•

IPServer:

Input

Server Address

for IPServer.

Figure 11. 3

IPServer Settings Interface

•

DynDNS:

Enter

Server Address

for DynDNS (i.e. members.dyndns.org).

In the

Device

Domain Name

text field, enter the domain obtained from the DynDNS website.

Enter the

User Name

and

Password

registered in the DynDNS website.

Figure 11. 4

DynDNS Settings Interface

•

PeanutHull:

Enter the

User Name

and

Password

obtained from the PeanutHull website.

Summary of Contents for LTN8932-R












































































































































































































Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands

LTS LTN8932-R, User Manual

Search results

Summary of Contents for LTN8932-R

Reviews:

Related manuals for LTN8932-R

Brands by name

Popular brands